Is the blue light blinking on your Litter-Robot 3. Allow the unit to complete the timing cycle and return to home position.
Litter Robot Troubleshooting What Do The Lights Mean Litter Robot Blog
If you feel that the Globe is heavy to one side or another check in the Litter Pocket to make sure that there is no wet or clumped litter stuck that is throwing off the weight of the unit during cycling.
Litter robot ready and cycle light on. In order to pause the cycle press any button on the Control Panel during the Clean Cycle. Illuminated will empty all litter from Globe into the Waste Drawer. Hold the Cycle button for 5 seconds.
Pressing the Cycle Button starts the Litter-Robot cleaning cycle. It will cycle then return to the Home position with the blue light on and the Cat Sensor will take a new reading of the units weightassuring your Litter-Robot will function properly. Litter-Robot flashing red light.
Wait 10 seconds then plug power supply back into the base. At this time the unit will have reset itself. First lets start by power cycling your unit.
Yellow light turns off blue light remains lit. If for some reason the unit is not cycling properly or the red light is blinking it could be that you simply need to adjust the cat sensor. To quit this mode simply press and hold the Cycle button until the yellow light turn off.
Press any button to return the Globe to home position. Unplug your power supply from the base. Turn the night light function on and off by pressing and holding the Power button.
Ensure the Globe is filled to the Fill Line and not above the Fill Line. Litter Robot 3 Has Lights to Indicate issues. When the yellow light is on the Litter-Robot is cycling.
If the yellow light is blinking advice so we can troubleshoot the bonnet or the anti-pinch feature. Your Litter-Robot will perform a cycle and return to its Home position with the blue light on. Hold the Cycle button for 5 seconds.
Purchase a Litter Robot or LitterBox Components. Cleaning the pinch sensors Checking the spring sensor Powering off and on via plug as power button not responsive Checking for control panel lockout Checked back clips are in Checked globe is locked at the back. The Reset button is so named because it resets the Cat Sensor.
After emptying the waste drawer be sure to press the Reset button to cancel the indicator light. A light sensor located above the Cycle button turns the night light on and off automatically. Out little robot has a continuous yellow amber cycling light and the control panel is totally unresponsive.
When the blue light is on the Litter-Robot is in standby mode and ready for use. Things we have tried. The automatic night light located in the upper bonnet is there to help guide your cat to the litter box.
If the light is solid blue the code has been successfully cleared. The red light should come on now. Yellow LED will illuminate during the clean cycle.
Put the Globe back on the base unit and ensure that it is on the track. If its the case this means the robot is in the 8-hour sleep mode. Allow the unit to complete its initial cleaning cycle.
If youve completed these troubleshooting steps and your unit is still having trouble you can always contact Litter-Robot customer support. Litter-Robot Customer Support Phone. To stop and abort the Clean Cycle press any button to pause the cycle then press either Empty or Reset buttons.
The unit is counting down to a clean cycle depending on your set wait time 3 7 or 15 minutes. Both blue AND yellow lights are now on. In order to pause the cycle press any button on the Control Panel.
9am 7pm ET. A solid red light on your Litter-Robot control panel means that the cat sensor was activated by your cat entering the globe while the unit was ready for use. You can think of the Cat Sensor as the scale and the Reset button as a way to zero the scale.
Plug the unit back in allow it to complete the start-up cycle and follow the steps below. Reset Button Empty Button Cycle Button Pressing while the Blue LED is illuminated will start the cleaning cycle. When youre done turn the unit back on.
When the blue light is flashing the waste drawer is full and should be emptied. Make sure your Litter-Robot is powered on with the blue light blinking. Press Cycle once again to resume the cleaning cycle.
With the unit powered ON unplug the power supply from the base and wait 10 seconds. Is the yellow light solid with the blue one.
Best Self Cleaning Litter Box For Cats Litter Robot
Litter Robot Iii Open Air Troubleshooting All 3 Lights Flashing Floppycats
Litter Robot 3 Open Air Troubleshooting All 3 Lights Flashing Floppycats Youtube
Litter Robot Troubleshooting What Do The Lights Mean Litter Robot Blog
